Eliminate the high

cost of corrosion!

EMPIGARD®

polymer coating process seals out corrosion!

Description EMPIGARD 10 polymer coating is a versatile new clear thermosetting coating which provides outstanding corrosion resistance to metal parts. This improved coating material has been developed in our research laboratories especially to meet the requirements of the automotive, appliance hardware and fastener industries.

The coating material is supplied as a water-borne system that does not require the use of organic cc-solvents, and is particularly well suited to today's increasingly stringent fire and environmental regulations.

EMPIGARD 10 polymer is primarily used on chromated zinc and cadmium plated steel parts.

Special Advantages

Excellent resistance to corrosive atmospheres in service and to salt spray (ASTM E 117) or C.C.T. alternate condensation tests.
Specially designed to accomodate GM 6183m, 6184m, FORD ESB M21P4, F.E.S. 75, and PS 7187.
Long life...could be used indefinitely.
Exceptional tolerance for accidentally introduced impurities, as well as ordinarily low-level contamination.
Very economical, coverage is typically 600-1.200 square feet per gallon, depending on application method.
Could be used on either bulk work or racked parts.
Supplied as a convenient-to-use aqueous liquid, easy to dilute to desired concentration for application.
Stable after freezing.
No fire hazard...diluted with tap water.
Polymer coating has an ideal balanced combination of: (a) chemical and solvent resistance, (B) adhesion, (c) flexibility, (d) hardness, and (e) abrasion and impact resistance.
Not affected by ultra violet radiation.
Easy to check for polymer's presence and cure.

DLH PLATING, LLC -2801 GRAND AVE. - CLEVELAND, OH 44104 - TEL: 216-231-1067 - FAX: 216-231-7030

Home

Special Advantages

Excellent resistance to corrosive atmospheres in service and to salt spray (ASTM E 117) or C.C.T. alternate condensation tests.

Specially designed to accomodate GM 6183m, 6184m, FORD ESB M21P4, F.E.S. 75, and PS 7187.

Long life...could be used indefinitely.

Exceptional tolerance for accidentally introduced impurities, as well as ordinarily low-level contamination.

Very economical, coverage is typically 600-1.200 square feet per gallon, depending on application method.

Could be used on either bulk work or racked parts.

Supplied as a convenient-to-use aqueous liquid, easy to dilute to desired concentration for application.

Stable after freezing.

No fire hazard...diluted with tap water.

Polymer coating has an ideal balanced combination of: (a) chemical and solvent resistance, (B) adhesion, (c) flexibility, (d) hardness, and (e) abrasion and impact resistance.

Not affected by ultra violet radiation.

Easy to check for polymer's presence and cure.